CS Airfoil is a fixed aluminium brise soleil (solar shading) system with all the required functionality you would expect to meet current legislation.
Designed to truly enhance and complement your exterior façade the CS fin shaped blades with accessories allow design and layout creativity.
External solar shading, like aluminium brise soleil systems are a proven method of significantly reducing solar heat gain in a building’s interior. Furthermore, it can reduce the need for air conditioning and therefore helps to reduce building CO2 emissions.
A wide selection of blades offering clean lines and sleek, modern design.
AF-100 (20mmx100mm)
AF-150 (30mmx151mm)
AF-200 (38mmx203mm)
AF-270
(50mmx270mm)
AF-320
(53mmx320mm)
AF-380 (66mmx380mm)
AF-430 (70mmx430mm)
Extruded aluminium birdsmouth brackets, simple and effective fixing system for CS Airfoil® blades.
| Blade Type | Bracket Angles | Standard Bracket Width (in mm)* | Fixing Hole Size (in mm) |
|---|---|---|---|
| AF-150 | 45° , 90° | 50 | 6.5 |
| AF-200 | 45° , 90° | 100 | 6.5 |
| AF-270 | 45° , 90° | 100 | 8 |
| AF-320 | 45° , 90° | 100 | 8 |
* Brackets can be cut to custom width to suit project requirements. It should be noted, however that the width of the brackets will have a bearing on the maximum spacing. Customer bracket designs may also be possible to suit a particular project. When required, aluminium closing plates can be supplied to suit the blade profile selected.
Stainless steel Compound Angle Fixing Brackets, used when dealing with corner details and facetted elevations.
| Blade Type | Standard blade angles* | Fixing hole quantities and size (in mm) |
|---|---|---|
| AF-150 | 45° | 2×9 |
| AF-200 | 45° | 2×9 |
| AF-270 | 45° | 2×9, 4×9† |
| AF-320†† | 45° | 2×9, 4×9† |
| AF-380†† | 45° | 2×9, 4×9† |
| AF-430†† | 45° | 2×9, 4×9† |
* Other angles (i.e. 30° and 60°) available on special request, please contact our Technical department for details on 01296 652800
† Four hole fixing brackets should be used where blade span exceeds 3500mm
†† Main screw ports must be tapped to suit M8x50mm long screws.
Stainless steel Parallel Off-set Fixing Brackets, used when creating straight runs of blades.
| Blade Type | Standard blade angles* | Fixing hole quantities and size (in mm) |
|---|---|---|
| AF-150 | 45° | 2×9 |
| AF-200 | 45° | 2×9 |
| AF-270 | 45° | 2×9, 4×9† |
| AF-320†† | 45° | 2×9, 4×9† |
| AF-380†† | 45° | 2×9, 4×9† |
| AF-430†† | 45° | 2×9, 4×9† |
* Other angles (i.e. 30° and 60°) available on special request, please contact our Technical department for details on 01296 652800
† Four hole fixing brackets should be used where blade span exceeds 3500mm
†† Main screw ports must be tapped to suit M8x50mm long screws.
